Lyndon,

I'm not familiar with the Roland, but I'm assuming that when you play back your harmony track, the lead vocal is mixed in to it...?

If that's the case, then what's happening is your vocal track is being recorded onto your harmony track when it should just be going to the monitor section of the multitracker. Bear in mind here that I've never used that machine, but there must be a switch or button on each channel strip that's labeled "Track 1/Monitor/Off" or something similar. Check the manual and make sure that it's in the "monitor" position (or mode) and it should work out fine.

If it doesn't work out, there should be an Email address on the Roland web site where you can send customer support questions.

Good luck...

------------------
Shandy Lawson

http://www.shandylawson.com

[This message has been edited by Shandy (edited 05-14-2001).]


Shandy Lawson
ShandyLawson.com